Cadence Flash F100-5 Przewodnik Instalacji Pobierz pdf (Strona 8)

OEM RADIO INTEGRATION WITH AUTOSTART

This newest series of Flash ampliers features our newest

circuitry innovation. Say for example you are trying to

integrate the Cadence Flash amplier in to a system with an

OEM radio which does not have RCA output jacks or a remote

turn on wire for the amplier, until now you would have had to

congure a complicated relay system to turn on the amplier

and use en external high-low converter to send the signal

in to the amplier.

But now all you need to do is to wire your speakers to

the included High Level Input harness and plug the

harness in to the amplier. When you turn on your OEM

head unit, the amplier will receive the music signal and

automatically turn on the amplier. When you turn o the

head unit, the amplier will automatically turn o after a

60 second built-in delay.

Do not use RCA and High Level Input at the same time.

Do not keep the speakers hooked up to the High Level Input

once you are using them as the ampliers signal input.

The ideal ground point for the High Level Input harness is

the radio ground, if thats not possible to reach any good

chassis ground point will do.

GND

GROUND POINT

REAR SPEAKER

OUTPUT

REMOTE HOOK-UP OPTIONAL

WHEN USING HIGH LEVEL INPUT

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 31 32

Brak uwag

Cadence Flash F100-5 Przewodnik Instalacji Strona 8